Stage audio monitors, often simply called “monitors,” are speakers placed on stage facing the performers. They allow musicians, singers, or speakers to hear themselves and other elements of the performance clearly during live events. This is crucial because the sound from the main speakers (the PA system) is directed toward the audience and may not be easily heard on stage due to its distance or direction.
Stage Monitors
1. EAW RSX12M Powered Stage Monitor
The RSX12M from EAW is a powered stage monitor boasting extremely approachable EAWmosaic™ iOS app delivers system prediction, control, and monitoring from any location in the venue. Proven EAW acoustical design and DSP including Focusing™ and DynO™ provides a pristine impulse response at all output levels.
Four pre-defined voicings provide a variety of tonal starting points while also offering maximum feedback stability. Integrated Dante™ networking (with loop-thru) on all models including Analog redundancy capability. Low latency of just 2.6 ms provides excellent transparency for vocal monitoring applications.
SPECIFICATIONS
- Frequency Response: 55Hz – 18kHz
- Max SPL:129dB
- Operating mod: bi-amp LF/HF
- Subsystem: 1x 12″ cone 2.5″ voice coil; 1x 1″ exit 1.77″ voice coil horn-loaded compression driver
- Nominal Beamwidth: 105° horizontal, 105° vertical
- Power Handling: 500W
- Connections: Powercon AC mains/loop, 2x Neutrik etherCON, RJ-45, XLR input/loop
- Dimensions: (HxWxD)13.1″ x 19.7″ x 19.2″
- Weight: 36 pounds (16.3 kg)
REASONS TO BUY
- Integrated Dante™
- Solid midrange performance
- Immersive sound
2. Yamaha DHR15M 15-Inch Powered Stage Monitor
The DHR15M is a 2-way bi-amp powered loudspeaker featuring a 15-inch woofer and a 1.75-inch HF driver in a space saving coaxial configuration with a custom-designed constant directivity horn, perfect for use as a floor monitor. Combining a 1000W amplifier and high performance DSP with the same plywood construction found on our high-end DZR Series, the DHR15M offers best-in-class sound quality and durability.
SPECIFICATIONS
- Speaker Type: 2-way, Bi-amped Powered Speaker, Bass-reflex
- Frequency Range (-10dB): 50 Hz – 20 kHz
- Coverage Area: H65ﾟ x V75ﾟ
- Crossover: 1.8 kHz: FIR-X tuning™ (linear phase FIR filter)
- Maximum Output Level (Measured peak, IEC noise@1m): 131 dB SPL
- Components:
- LF: Diameter:15″ cone, Voice Coil: 3″, Magnet: Ferrite
- HF: Diaphragm: 1.75″, Type: 1″ throat compression driver Coaxial, Magnet: Ferrite
- Amplifier: Class-D
- Power Rating:
- Dynamic: 1,000W (LF: 800W, HF: 200W) *1
- Continuous: 465W (LF: 400W, HF: 65W)
- Cooling: Fan cooling, 4 speeds
- Power Consumption: 74W (1/8power), 18W (Idle)
- Power Requirements: 100V, 100-120V, 220-240V, 110/127/220V (Brazil), 50/60 Hz
- A/D D/A Converters: 24 bit 48 kHz Sampling
- Processors: OFF, 100 Hz, 120 Hz, 24 dB/Oct.; D-CONTOUR: FOH/MAIN, MONITOR, OFF
- I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Cabinet material: Plywood
- Finish: Durable Polyurea Painting, Black
- Handle: Side x1
- Pole Socket: Φ35 mm x1 (Side)
- Floor Monitor Angle: 57°
- Dimensions: (WxHxD)25.3×14.5×19.9″ (642x369x505mm) (height includes rubber feet)
- Net Weight: 50.7 lbs (23kg)
REASONS TO BUY
- Scratch-resistant surface
- Smooth phase and frequency response
- Minimal Vibration
3. RCF NX 915-SMA 15-Inch Powered Stage Monitor
NX 915-SMA speaker is a stage monitor designed for sound providers, musicians, bands, and DJs. The combination of a 1.75” compression driver, 15” woofer, two-channel 2,100W amplifier, and the TRW waveguide produces coherent 100° x 70° coverage for the listening area with up to 131dB SPL of distortion-free sound. Used as a stage monitor, stand-alone speaker system, or satellite paired with a subwoofer, the NX 915-SMA blends high performance and reliability in a compact package. Combining RCF proprietary FiRPHASE and Bass Motion Control DSP processing, NX 915-SMA Series speakers deliver absolute clarity and deep, powerful bass response. The rugged all-wood cabinet is easy to carry and set up on stage or on a pole.
SPECIFICATIONS
- Frequency Response: 45 hz ÷ 20000 hz
- Max spl @ 1m: 131 db
- Horizontal coverage angle: 100°
- Vertical Coverage Angle: 70°
- Transducers:
- Compression driver: 1 x 1.0”, 1.75” v.c
- Woofer: 15”, 2.5” v.c
- Input/output section:
- Input signal: Bal/unbal
- Input connectors: Combo xlr/jack
- Output connectors: Xlr
- Input sensitivity: -2 dbu/+4 dbu
- Processor section:
- Crossover frequencies: 1600 hz
- Protections: Thermal, rms
- Limiter: Soft limiter
- Power section:
- Total power: 2100W peak
- High frequencies: 700W peak
- Low frequencies: 1400W peak
- Cooling: Convection
- Connections: Powercon true1 top in/out
- Physical:
- Cabinet/case material: Plywood
- Handles: 1 on side and 1 on top
- Pole mount/cap: Yes
- Grille: Steel
- Color: Black
- Dimensions: 14.07″ H x 27.76″W x 16.73″ D
REASONS TO BUY
- Up to 131 dB Sound Pressure Level
- 2100W Class-D bi-amplification
- 45-20000 Hz linear frequency response
4. RCF ST 15 SMA II 15-inch 1,200-watt Powered Stage Monitor
The RCF ST 15 SMA II provides world-class RCF coverage in a roadworthy form factor. RCF specially tunes this powered stage monitor’s 15-inch woofer and 1-inch compression driver to provide a flat, full-spectrum response so that you’ll hear your sound precisely as your audience does. The exceptionally efficient 2-channel 1,200W amplifier pushes out a formidable 131dB max SPL, with a host of DSP features to adjust your sound for a diverse range of applications. Lastly, the ST 15 SMA II has been thoroughly road-proofed, constructed from a lightweight yet durable Baltic birch plywood cabinet, scratch-resistant black textured finish, and heavy-duty powder-coated metal grille.
SPECIFICATIONS
- Type: Stage Monitor
- Powered: Yes
- LF Driver Size: 15″
- HF Driver Size: 1″ Compression Driver
- Power Amp: LF 400W RMS, 800W Peak, HF 200W RMS, 400W Peak
- Total Power: 600W RMS, 1200W Peak
- Frequency Response: 45Hz-20kHz
- Crossover Frequency: 1400Hz
- Maximum Peak SPL: 131dB SPL @ 1m
- Horizontal Coverage Angle: 90 Degrees
- Vertical Coverage Angle: 60 Degrees
- Enclosure Material: Baltic Birch Plywood
- Mounting Options: Floor Wedge
- Power Source: Standard IEC AC cable
- Height: 14.25″
- Width: 26.5″
- Depth: 18.62″
- Weight: 44.75″
REASONS TO BUY
- Full-spectrum response
- 131dB max SPL
5. Turbosound TFX152M-AN 1100W 15 inch 2-way Flashline Series Stage Monitor
The Turbosound TFX152M-AN is loaded with a powerful Class D Klark Teknik amplifier. This monitor wedge delivers 1,100 watts of clear sound. Custom coaxial drivers ensure that the sound is consistent and thanks to onboard Klark Teknik DSP, getting the perfect balance from your TFX152M-AN is easy. Top it off with Ultranet digital-audio connectivity, and you’re ready to integrate your TFX152M-AN into your high-tech PA rig.
SPECIFICATIONS
- Powered: Yes
- LF Driver Size: 15″ low mass voice coil driver
- HF Driver Size: 1″ Titanium dome compression driver
- Total Power: 1100W Class D
- Inputs: 1 x XLR-1/4″ combo
- Outputs: 1 x XLR
- Maximum Peak SPL: 127 dB SPL @ 1m
- Horizontal Coverage Angle: 60°
- Vertical Coverage Angle: 40°
- Enclosure Material: 15mm plywood with fibre glass composite ends
- Height: 13.8″
- Width: 20.9″
- Depth: 22.3″
- Weight: 47.3 lbs.
REASONS TO BUY
- Class D Klark Teknik Amplifier
- Klark Teknik DSP
- Ultranet digital-audio connectivity
6. JBL EON715 1300-watt 15-inch Powered PA Speaker
The JBL EON715 Powered PA speaker delivers a studio-monitor-quality sound, providing you with remarkable performance for nearly any live application. An LCD screen makes accessing PA functions easy and onboard EQ parameters can even be controlled via Bluetooth for convenient command of this innovative PA speaker’s silky highs and chest-thumping lows. You also get full True Wireless Stereo (TWS) operation.
SPECIFICATIONS
- Powered: Yes
- Power Configuration: Bi-amped
- Channels: 3-channel mixer
- LF Driver Size: 15″ Ferrite Woofer
- HF Driver Size: 1″ Neodymium Tweeter
- LF Driver Power Amp: 1000W Peak, 266W RMS
- HF Driver Power Amp: 370W Peak, 85W RMS
- Total Power: 1300W Peak, 650W RMS
- Inputs: 2 x XLR-1/4″ combo
- Outputs: 1 x XLR (thru)
- Bluetooth: v5.0
- Wireless: Bluetooth
- Frequency Range: 45Hz-20khz (-10 dB)
- Crossover Frequency: 1.9kHz
- Maximum Peak SPL: 128dB
- Horizontal Coverage Angle: 90 Degrees
- Vertical Coverage Angle: 60 Degrees
- Signal Processing: Ducking, Speaker Delay, Parametric EQ
- Enclosure Material: Polypropylene
- Mounting Options: 4 x M10 Suspension points, 36mm Pole socket, Universal Yoke mount
- Power Source: Standard IEC power cable
- Height: 27.63″
- Width: 17.24″
- Depth: 13.81″
- Weight: 37.25 lbs.
REASONS TO BUY
- Onboard EQ parameters
- Bluetooth
- True Wireless Stereo (TWS)
7. Yamaha BR12M 600W 12 inch Passive Floor Monitor
The Yamaha BR12M is the perfect pick for small stages, school events, rehearsal spaces, and beyond. Thanks to a lightweight design and quality construction, the BR12M is a solid choice for onstage reinforcement.
SPECIFICATIONS
- Powered: No
- LF Driver Size: 12″
- HF Driver Size: 1″
- Impedance: 8 ohms
- Total Power: 600W
- Inputs: 2 x 1/4″
- Frequency Range: 65Hz-20khz
- Maximum Peak SPL: 97dB
- Horizontal Coverage Angle: 40 Degrees
- Vertical Coverage Angle: 90 Degrees
- Enclosure Material: MDF
- Mounting Options: Pole, Floor Wedge
- Height: 16″
- Width: 22.4″
- Depth: 13.1″
- Weight: 34.4 lbs.
REASONS TO BUY
- Affordable
- Good For Small Areas
8. Peavey PV 12M 500W 12 inch 2-way Floor Monitor
The PV 12M is a two-way system with a 12-inch Sheffield Pro 1200+ premium woofer and a 14XT 1.4-inch titanium-diaphragm compression driver (no piezos) coupled to a constant-directivity horn with Sound Guard IV high-frequency driver protection. The PV 12M is rated at 500 watts program and 1,000 watts peak power handling capability and allows the PV 12M to be angled at either 30 or 45 degrees from the floor in addition to being pole-mounted. Two 1/4-inch, full-range parallel inputs allow easy daisy chaining of several PV 12Ms.
SPECIFICATIONS
- Powered: No
- LF Driver Size: 12″
- HF Driver Size: 2.5″
- Impedance: 8 ohms
- Total Power: 1000W
- Inputs: 2 x 1/4″ (Parallel)
- Outputs: 2 x 1/4″ (Parallel)
- Frequency Range: 52Hz-21khz (-10 dB), 68Hz-17kHz (±3 dB)
- Maximum Peak SPL: 127dB
- Horizontal Coverage Angle: 40 Degrees
- Vertical Coverage Angle: 90 Degrees
- Enclosure Material: 1/2″ MDF
- Mounting Options: Pole, Floor Wedge
- Height: 22.38″
- Width: 17.75″
- Depth: 12.56″
- Weight: 37 lbs.
REASONS TO BUY
- Titanium-diaphragm compression driver
9. Behringer VP1220F 800W 12 inch Passive Floor Monitor
The Behringer Eurolive VP1220F is 12″ monitor wedge packs the same great sound as their VP1220, only in a handy wedge shape intended for the talent onstage. A solid 12″ low-frequency driver and a 1.75″ titanium horn to provide you with an extended frequency response and excellent clarity. The VP1220F features a rugged exterior, steel grille, and a heavy duty recessed handle and with both 1/4″ and speakON connectors onboard (including passthroughs).
SPECIFICATIONS
- Powered: No
- LF Driver Size: 1 x 12″
- HF Driver Size: 1.75″ Titanium compression driver
- Impedance: 8 ohms
- Power Rating: 200W Continuous
- Total Power: 800W Peak
- Inputs: 2 x 1/4″ (parallel), 2 x speakON (parallel)
- Frequency Range: 55Hz-20kHz
- Maximum Peak SPL: 93dB
- Height: 16.9″
- Width: 17.3″
- Depth: 22.6″
- Weight: 35.7 lbs.
REASONS TO BUY
- Titanium horn
- Heavy duty design
10. Electro-Voice PXM-12MP 700W 12 inch Powered Floor Monitor
The PXM-12MP is a wedge for traditional monitoring purposes with 12″ coaxial driver and 55° firing angle supply a crisp full-range response in a wide arc and can be pole mounted. It has a robust 700-watt Class D power amp and powerful onboard DSP and a rugged steel grille.
SPECIFICATIONS
- Transducer: 12” coaxial
- Power: 700W total (500+200), Class-D
- Frequency Response: 64 Hz – 20k Hz (-3 dB)
- Crossover Frequency: 1.6k Hz
- Max SPL: 129 dB peak @ 1m
- Dispersion: 90° x 90° (HxV)
- Enclosure: 15mm plywood
- Weight: 29.8 lbs.
- Size: 16.1 x 19 x 13.1” (WxDxH)
REASONS TO BUY
- Compact, lightweight
- Wedge or pole-mounting
- Smooth, loud response
- Onboard delay ideal for rear-fill use
